Running Performance Simulations and Analyzing Results
Last updated June 12, 2024
Introduction: Performance simulations are essential for predicting the output and efficiency of your PV system. This guide provides steps to run simulations and analyze the results using RatedPower.
Step-by-Step Instructions:
- Set Up Simulation Parameters:
- Log in to your RatedPower account and open your project.
- Navigate to the "Performance Simulations" section.
- Input necessary parameters such as module type, inverter settings, system configuration, and site-specific data.
- Run the Simulation:
- Select the "Run Simulation" option.
- RatedPower will use the input parameters to perform detailed performance simulations.
- The process may include multiple iterations to account for different scenarios and configurations.
- Review Simulation Results:
- Once the simulation is complete, navigate to the "Results" tab.
- Review key performance metrics such as energy yield, system efficiency, and capacity factor.
- Compare results from different simulation runs to identify the optimal configuration.
- Analyze and Interpret Data:
- Use the provided graphs and tables to analyze the performance trends and patterns.
- Identify any potential issues or areas for improvement in the system design.
- Make data-driven decisions to enhance the overall performance of your PV project.
Was this article helpful?